SelectingandLocatinga Chimney |
A chimney is a long-term investment so it pays to get the right chimney installed properly. It is easy to make mistakes in selecting and locating a chimney, so here is some reliable advice that will help you avoid problems and get maximum performance from your chimney and wood burning appliance.
|
Match the chimney to your stove or fireplaceTo work properly, your new wood burning appliance needs a chimney that suits its characteristics. There are two main factors to match: SizeIn general, the chimney flue (the hole that gases flow through) should match the size of the outlet on the stove. Bigger is definitely not better when it comes to chimneys. In special cases (like with a very tall chimney), a chimney flue can be smaller than the appliance outlet. Always get professional advice before selecting a chimney of a different size than the stove outlet. InsulationHigh performance stoves and fireplaces need high performance chimneys. And high performance chimneys always have insulation. If you have selected a purely decorative fireplace without gasketed doors and air controls, then an uninsulated chimney like conventional masonry or air cooled metal might be satisfactory. But if you have an advanced stove or fireplace, you'll need a high performance chimney like a 650°C model, a specialized fireplace chimney or a lining system in a masonry chimney.
|
|||||
|
|||||
If a chimney is kept warm by being inside the house, it will always make more standby draft than the house makes stack effect. The resulting low pressure zone at the fireplace opening means that when you light a fire it will kindle quickly without smoking. Save yourself a lot of grief: don't fall into the outside chimney trap. |
|||||
Locate the hearth in the heart of your homeThis is more than a hackneyed homage to homespun values, it is one key to a successful stove or fireplace. By locating your hearth inside the house and not against an outside wall, the chimney will rise through the warm space for most of its length and will exit the roof near its peak. The result is excellent chimney performance, unaffected by cold temperatures or harsh winds. Don't make the mistake of locating a chimney low on the eaves of a cathedral roof, or in a one story section of a two story house. If the chimney exits the warm part of the house below its highest level, the house might function as a better chimney than the chimney. |
|||||
|
|||||
Your new chimney must meet safety codesA high priority is to ensure your new chimney is safe so you won't have nagging worries about fire putting your home and family at risk. Here are the options: Factory-built metal chimneyFor a wood stove you would select a 650°C (HT in the US) metal chimney, which is a high-performance insulated unit. For fireplaces, the manufacturer will specify the correct chimney and your dealer can tell you what the options are. Masonry chimneyA conventional masonry chimney, made of brick, block or stone could be a suitable option, depending on the appliance you choose. There are several types and brands of liners that can be installed in masonry chimneys to improve their performance. If yours is a high performance appliance, you should consider an upgraded liner. Note that full stainless steel liners are mandatory for fireplace insert installations (Canada only, but strongly recommended). |
|||||
Give the chimney some of the heatYou might think that any heat flowing into the chimney with the exhaust is waste, but it is not. The chimney needs heat to stay clean and free from corrosive moisture. Don't be afraid to burn the stove or fireplace hot, at least for a brief period, each time you start a fire. This practice heats up the appliance and chimney structure and `primes' the chimney to make reliable draft for the rest of the heating cycle. |
|||||
Maintain your chimney investmentChimneys must withstand corrosive compounds, extremes of temperature and repeated heating and cooling cycles. Each time a chimney heats up, its materials expand and when it cools they shrink. This constant movement takes its toll on joints, seals and the structural materials. There is also the potential for the build up of combustible deposits called creosote. To protect your investment, check the chimney for creosote regularly and have it professionally cleaned and inspected annually (fire codes require chimneys to be inspected and cleaned at least once a year). By following this advice, your investment will be protected through preventative maintenance before serious damage occurs. |
|||||