Remodelling your basement is one of the easiest and most cost-efficient ways of adding new living space to your house. Besides the traditional recreation room, more and more people are using basements for self-contained granny flats, rental suites or home offices.

No matter what the renovation purpose, ensuring that the space is clean, dry and healthy is a critical part of the project and something that must be done before anything else.

Common Situations

Moisture is the most common problem in basements; either entering from outside sources or being produced inside by the occupants activities. The soil around the walls can contain a large amount of moisture from surface water that is seeping down or from a high water table. Water can find its way inside by gravity or through a crack or flaw in the water protection layer of the foundation. Water can also be pulled up by a wicking action or pushed up by hydrostatic pressure from the soil under the walls or floor.

In summer, warm moist air from outside can enter the house and lead to condensation on the cool basement walls or floor. Daily activities also produce moisture that can be trapped inside the home.

Basement moisture problems often include:

Foundation cracks that leak.
Standing water.
Efflorescence (white, chalky stains).
Wet decaying wood in contact with concrete.
Damp or moldy walls or floor.
Condensation on windows, pipes and other fixtures.
Wet insulation.
Moisture damaged finishes.
Musty or damp carpets.
High humidity.
Stuffy, damp smells.

Healthy Housing Renovating is an ideal time to make your house healthier for you, the community and the environment. When assessing your renovation project, be sure to consider the five essentials of Healthy Housing.

House as a System

A house is much more than just four walls and a roof, its an interactive system made up of many components including the basic structure, heating, ventilation and air conditioning (HVAC) equipment, the external environment and the occupants. Each component influences the performance of the entire system. A renovation provides an opportunity to improve how your house performs.

Basement moisture problems can have a huge effect on the durability of the entire house structure and on the indoor air quality (IAQ) throughout the house. Avoid Surprises Moisture problems are caused by a buildup of a variety of water sources. Whether it comes from surface or ground water that leaks in, water that wicks up or water vapour that condenses, it must be controlled. The easiest way to control moisture is to stop it from coming in and to exhaust the water vapour produced in the house to the outside.

Here are some of the likely situations that people encounter. However, every situation is unique. You may need to hire a qualified professional to do a thorough investigation, find the moisture problems and suggest the best solutions.

Do the roof, eavestroughs, downspouts and grading direct surface water away from the house?

Repair or replace a leaky roof.

Ensure that eavestroughs and downspouts with extensions direct water away from the building.

Slope the grade away from the house. A poor rain drainage system will continue to provide a large volume of water that can leak in or overwhelm basement drainage systems.

Do window wells drain freely? Install drainage below window wells. Water may accumulate in the wells, leading to possible leakage into the basement through or around the window.

Does water leak in through cracks in the foundation wall or floor? Patch small cracks from inside with cement-based material or use an injection-type foundation repair system. Fill large cracks from inside (and outside if possible) with hydroscopic material that expands as it dries. Consult a structural engineer or basement specialist concerning multiple, severe or expanding cracks. Water may penetrate cracks, continue to deteriorate the existing house, affect IAQ and any proposed renovations.

Severe or active cracks may be an indication of future structural problems or even present unsafe conditions Without exterior protection and drainage, water will eventually find its way inside. Are there any pools of water on the floor or damp spots on the walls?

Is there a working floor drain at the lowest point of the floor? Is there a working sump pump in a covered sump pit? Has the basement ever flooded? Dampproof or waterproof the outside of the foundation walls. Install a perimeter drainage system. Install a floor drain with a trap and a sump pump in a covered pit. Make sure that the sump cover is tightly sealed.

If future flooding seems unavoidable, do not install interior insulation or finishes that will be damaged by water. Without a floor drain, any water spilled inside cant get out. Working sump pumps may help, but open pits can be another source of humidity and soil gases. If future flooding is possible, interior insulation and finishes give mold a place to grow and will cause more difficulty and expense in flood clean up.

Is there a complete concrete floor? Install a concrete floor over a sealed polyethylene moisture barrier. Dirt floors are a huge source of moisture and soil gases.

Are there any white, chalky stains (efflorescence) on the walls or floor? Provide better drainage and dampproofing to the outside. Efflorescence indicates water evaporation of moisture that has wicked through the foundation wall. Continued efflorescence is a sign of ongoing moisture problems.

Are there any black, white or green mold stains or fuzzy growth on the walls or floor? Clean up mold according to CMHC guidelines. Remove the sources of moisture. Some molds are toxic. Clean up must be done carefully to avoid health hazards. Are there any wet or decaying wood windows, sill plates, columns or beam ends in contact with concrete? Replace decaying wood. Provide a capillary break between wood and concrete. Seek professional advice as damage may compromise structural strength. Wood in contact with concrete will continue to decay and will eventually result in structural problems. Are floor tiles lifting? Are carpets damp or musty? Damp concrete causes lifting floor tiles and damp carpets. Improve foundation drainage. Install a polyethylene moisture barrier over the concrete floor as part of a retrofit floor system. Replace carpets with hard surface flooring. Tiles wont stick to damp floors. Damp carpets will continue to be a haven for dust mites and mold.

Is there any wet insulation, framing or moisture damage on finished walls? Remove wet insulation or finishes. Fix the moisture source before refinishing. Materials that are wet from any source (leaks, capillary action or condensation) will get moldy and decay, leading to unsightly finishes, durability problems and hazards to health. Is there any condensation on windows, pipes or other surfaces? Is the air humid? Does it seem stuffy, damp or smelly? Are basement windows open in summer? Is a dehumidifier or air conditioning used in summer? Is there any ventilation or air circulation? Is the basement heated the same as the main floors? Does a clothes dryer in the basement exhaust outside, using a minimal length of duct? Is wet laundry hung to dry in the basement? Is firewood stored indoors?

Install energy-efficient windows, insulate cold water pipes and insulate walls (and floors, when possible) to achieve warm surfaces. High humidity plus cold surfaces results in condensation. Keep basements ventilated and heated. In summer, use a portable dehumidifier or air conditioning to reduce humidity. In warm, humid weather, keep basement windows closed. Run the furnace fan continuously to circulate house air. Provide ventilation to get rid of humidity. Run dryer exhausts directly outside. Do not hang wet laundry or store firewood inside. Opening basement windows during warm, humid weather will make basements wetter with no chance to dry out. Adding humidity to already damp basements will only make problems worse. High humidity will result in condensation on cold surfaces. Are there a lot of stored items in the basement? Get rid of unused items. Store items on shelves. Avoid storing in cardboard boxes that readily absorb moisture. Allow air to circulate. Too many stored items, especially on the floor, will allow hidden corners to get even wetter and encourage mold growth.

Rewards

Correcting foundation moisture problems can improve the durability of your home and eliminate some dangerous health hazards. A dry, clean basement space will provide a good starting point for your other planned renovations.

Skills to Do the Job

Some tasks such as a thorough basement cleanup dont require special skills. A homeowner with good fix-it skills may be able to do a lot of the other work too, including: Roof, eavestrough and downspout repairs. Grading and landscaping. Patching small basement cracks. Clean-up of small mold patches. Removing damp insulation, finishes or carpets. Insulating cold water pipes. Installing dryer venting. Installing storage shelves. Hire a professional renovator for exterior, below-grade water protection and drainage problems, large or moving foundation cracks, concrete placement or major structural repairs. You may also need a heating contractor to install heating, cooling and ventilation equipment.